General industry

This installation was integrated into an existing production line at the customer's site and is used for cross-folding non-woven cloths.

This machine was designed as a hydraulic press to press galvanized steel profiles into a wooden panels. The press has an automatic feeding table that allows the operator to prepare the various elements in safety, outside of the pressing area.

Development of an 8-axis manipulator for industrial radiology (non-destructive testing technology). A complete package: From planning through production to final assembly in Dubai, this project was supervised by our engineering office and technicians.

This unit is used to distribute an oil film in a sheet metal processing line. The machine consists of a stable chassis on which 2 rubberized rollers are guided. The lower roller is fixed in the working position, while the upper roller serves as a pressure roller and exerts an adjustable force on the sheet via 2 pneumatic cylinders to distribute the oil evenly.

This prototype was developed specifically for a manufacturer of floor coverings and is used to simulate long-term stress caused by a shoe sole. The test specimen is rubbed over the sample with a straight pneumatic movement and a defined pressing force.

The system was developed to unwind, cut (longitudinal) and rewind non-woven products. At the same time, the machine was designed so that the customer can now check, cut and rewind damaged rolls. The machine is also equipped by an edge control system which makes it capable rewind correctly rolls that have been wound badly on the production machine.

For reasons of fire protection and cost-effectiveness, this storage rack was designed for 3 IBC containers.

This feed table is used to introduce small, thin-walled stainless steel pipes into an existing production facility. Installing the table significantly increased customer's productivity and operator's ergonomics at this point.

Thanks to our special and prototype construction, we can always build a machine that is optimally adapted to a wide range of customer requirements. Our combined know-how and experience enable us to develop a holistic project together and support you from the needs analysis through layout planning, manufacturing, and assembly to on-site commissioning.